Specifications
PS 400i / 1200i / 2400i UPS models are ideal for SOHO environment.
| |
PS 400i |
PS 1200i |
PS 2400i |
| Capacity VA/W |
400VA/200W |
1200VA/720W |
2400VA/1440W |
| Input |
| Nominal Voltage |
220/230/240VAC |
| Voltage Range |
170-280VAC (Narrow Range) |
| 90-280VAC (Wide Range) |
| Output |
| Voltage |
230VAC RMS |
| Voltage Regulation (Bat. Mode) |
10% / -18% |
| Frequency |
50Hz or 60Hz |
| Frequency Regulation (Bat. Mode) |
+/-0.1 Hz |
| Output Waveform |
Modified Sine Wave |
| Battery & Charger |
| Charger Current |
3 Amp +/- 1Amp |
10 Amp +/- 1Amp |
10 Amp +/- 1Amp |
| DC Voltage |
12V |
12V |
24V |
| Overcharge Protection |
15V |
15V |
30V |
| Transfer Time (Typical) |
20ms Typical |
| Efficiency |
| AC to AC |
>95% |
| DC to AC |
>80% |
| Indicator |
| AC Mode |
Green lighting |
| Battery Mode |
Yellow lighting |
| Battery Charging Mode |
Green flashing every 2 seconds |
| Overload |
Red flashing every 0.5 second |
| Fault |
Red lighting |
| Audible Alarm |
| Low Battery at Battery Mode |
Sounding every 2 seconds |
| Overload |
Sounding every 0.5 second |
| Fault |
Continuously Sounding |
| Protection |
| Full Protection |
Discharge, overcharge and overload protection |
| Physical |
| Dimensions (D x W x H mm) |
228 x 82.5 x 207 |
293 x 82.5 x 231.5 |
| Net Weight (kgs) |
1 |
2.3 |
2.55 |
| Environment |
| Operating Environment |
0-40C, 0-90% Relative humidity (non-condensing) |
| Noise level |
Less than 50dB |
* Product specifications are subject to change without further notice.
Go back